Ubiquiti UniFi Access - G3 Reader Pro čtečka karet/interkom s dipslayem (RFID 13,56MHz/NFC/mobil) černá

Specifikacia Ubiquiti UniFi Access - G3 Reader Pro čtečka karet/interkom s dipslayem (RFID 13,56MHz/NFC/mobil) černá

Profesionální čtečka G3 generace s displayem a s funkcí Touch Pass support.Overview Dimensions 160 x 40.4 x 40.55 mm Integrated Camera Yes NFC Card & Keyfob Access Yes PIN Access Yes Apple/Google Wallet Yes Mobile Unlock Yes Two-Way Intercom & Doorbell Access Yes NDAA Compliant Yes UL 294 Level Destructive attack: Level I Line security: Level I Endurance: Level I Standby power: Level I Weatherproofing IP55 MechanicalWeight 136 g (4.8 oz) Enclosure Material Polycarbonate, glass Mount Material Aluminum alloy Mounting Wall, gang-box mount (Included) Angle mount, junction box (Optional) Hardware Indoor and Outdoor Use Yes Ambient Operating Temperature Device: -30 to 45° C (-22 to 113° F) Display: -10 to 45° C (14 to 113° F) Ambient Operating Humidity 5 to 90% noncondensing Networking Interface (1) GbE RJ45 port Connectivity BLE 4.2 NFC Power Method PoE UL 294 Power-limited Class 2 PSU UL 60950-1/62368-1 LPS/PS2 PSU Max. Power Consumption 6W Supported Voltage Range 48V DC ESD/EMP Protection Air: ±15kV, contact: ±8kV Sensors Proximity sensor Display 120 mm (4.7") diagonal Touch Screen Technology Capacitive touch Display Luminance 480 nits (Typical) Screen Orientation Portrait Resolution 1280 x 286 px Microphone Yes Speaker Yes LEDs R/G/B/W/Amber Learn More Button (1) Factory-reset NFC Frequency 13.56 MHz NFC Read Range < 30 mm (1.18'') NFC Technology ISO/IEC 14443A / 14443B / 15693 / 18092 (Ecma 340) MIFARE Classic / MIFARE DESFIRE Sony FeliCa™ (ID only) NFC Forum tags T1T, T2T, T3T, T4T and T5T ECP 2.0 PoE Cabling Requirements Cat 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site. The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm² ) for patch cords; 24 AWG (0.21 mm² ) for horizontal or riser cable. UL 294 Statement Compliance with IEEE 802.3 specifications was not verified as part of UL 294. The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits. CAN/ULC-60839-11-1 Grade Grade assignment: I Certifications CE, FCC, IC,UL 294, CAN/ULC-60839-11-1 Document number, and issue date and/or revision level UA-G3-Pro-W/UA-G3-Pro-B, V01 Software Management Application Access Software Information The software version can be checked at https://unifi.ui.com